Triton MAKO PEDESTAL Installation Manual - Manual (Page 7)

7
TRITON SYSTEMS, INC.
MAKO CASH DISPENSER PEDESTAL INSTALLATION GUIDE
ATTACH OPTIONAL SECURITY CHAIN
TO VAULT
Open the security container door. Note the pre-drilled
mounting holes in the floor of the container (Figure 13).
These holes will be used to attach the top mounting
plate and bracket assembly for the security chain.
Place the remaining “minus” plate into position, align-
ing it with the mounting holes and ensuring the slot is
oriented vertically, as shown in Figure 14.
Place the pin bracket into position. Secure it to the
mounting plate and security cabinet floor using the two
1/4" screws, nuts and washers (provided), as shown in
Figure 15. Reach into the lower enclosure to feed the
nuts onto the screw threads. Use a 1/4” nut driver or
socket wrench to tighten the screws down firmly.
Reach into the lower enclosure and feed the link at the
free end of the security chain up through the slot in the
pin bracket. Insert the ring pin completely through the
bracket and chain link. The pin should lock into place.
(See Figure 16)
This completes the installation of the optional security
chain.
7
Fig. 15
Mounting Screws
Pin Bracket
Fig. 14
“Minus” Plate in Mounting Position
Fig. 13
Mounting Holes
Fig. 16
Ring Pin Fully Inserted Chain End-Link