Triton RL2000 Installation Manual User Manual
Page 29
2 9
M
ODEL
RL2000 I
NSTALLATION
M
ANUAL
VSAT (S
ATELLITE
)
VSAT stands for “Very Small Aperture Terminal” and refers to receive/transmit terminals installed at dispersed
sites connecting to a central hub via satellite using small diameter antenna dishes (0.6 to 3.8 meter).
VSAT technology represents a cost effective solution for users seeking an independent communications
network connecting a large number of geographically dispersed sites. VSAT networks offer value-added
satellite-based services capable of supporting the Internet, data, LAN, voice/fax communications, and can
provide powerful, dependable private and public network communications solutions.
I
NSTALLING THE
VSAT C
ABLES
(
OPTIONAL KIT
)
1.
If the unit is ON, enter Management Functions>System Parameters>Shut Down the Terminal. When
prompted, open the control panel hood and turn the power switch on the power supply to the OFF (0)
position.
2.
Refer to the section on “Power and Communication”. Route the Comms cable through the cabinet
base cable access hole. Secure cable inside vault area and continue up to the control panel access
holes.
3.
Connect the RJ-45 connector end of the Comms cable to the A
UXILLARY PORT
on the Docking board
assembly.
4.
Connect other end of Comm cable (RJ-45 connector) to the Sub-D adapter. Refer to the Configuration
manual for programming VSAT options.
Sub-D adapter.