Triton RL23XX/RL5XXX (XS/X2/XP) - Manual (Page 5)

d
irect
l
iGhtinG
(dc-p
owered
)
5
Model 91XX w/TDM or Minimech and a hard-wired single power supply:
Locate the power extension cable (splitter) included in the kit. The cable
connectors are marked. Disconnect the mainboard power input and connect it
to one leg of the extension cable. Refer to the power extension cable (splitter)
configuration diagram below. Connect the midtopper DC power cable to the other
leg. Reconnect this power cable assembly back to the mainboard.
Power extension cable
(splitter).
Mainboard power disconnected. Power extension cable with topper and
mainboard power cables connected.
LED Topper
Power Supply
Main Board
Power extension cable (splitter) configuration.
6. Turn the power supply to ON (I). The topper sign should light up. Close and
lock the control panel.
Model 91XX hard-wired single power
supply