Triton RL331X TRAVERSE User Manual - Manual (Page 32)

4-4
M
ODEL
RL331X U
SER
M
ANUAL
9. Feed the end of the paper over the stationary
bar, around and under the tension bar, and
into the Printer Paper Guide. (Illustration from
step 7) Push the paper forward into the printer.
The printer will activate and automatically
feed the paper through the printer and present
approximately 4 inches of paper out the front.
Stationary Bar
Tension Bar
A diagram is posted on the left side of the
printer.
NOTE: A new full roll of paper will be
heavy enough to produce a loop, as shown
at the right. This is normal. As the roll de-
pletes, the loop will get smaller and even-
tually contact the Tension Bar. (This view
from the opposite side for clarity)