Triton RL331X TRAVERSE User Manual User Manual
Page 25
3-5
C
ASSETTE
C
LOSE
/ C
ASH
R
EPLENISHMENT
Replenish Cassette
SCDU/HCDU
Load note tray with currency.
3. Add the number of bills being placed into
the cassette to the number that remained.
The “Total” number of these bills will be
entered in the “Enter Cassette Quantity”
option. (step 6 page 3-4)
2. Count the number of bills that remain in the cassette, if any. Next, count the number
of bills that are being added into the cassette.
1. Pull the packer plate to the rear of the tray (toward the handle). Ensure the packer
plate is fully back. Maintain pressure on the packer plate as needed while loading
notes.
Loading the Note Tray
Note: You may wish to record the number of notes removed from the reject compart-
ment for use when balancing the note tray against the cassette/day close records.
2. Remove any rejected notes. The reject compartment is located above the cassette.
3. To remove the note tray, grasp the tray handle, lift slightly, and slide the tray out of
the mechanism. Place the note tray on a fl at level surface. Use the security key to
unlock the cassette, and open the lid.
1. Unlock and open the security cabinet door.
Removing note tray from the dispensing
mechanism.
Removing rejected notes.