Avaya OFFICE 5410 - Manual (Page 41)

Function Key Programming Function Keys - Page 41
IP Office 5410 User’s Guide Function Keys - Page 41
40DHB0002UKEY – Issue 1 (7th February 2005) Function Key Programming
HGDis - Hunt Group Disable
Sets the extension's group membership as disabled. This function does not take the
Hunt Group Out of Service.
This function can be programmed with or without a target group number. This function
cannot be programmed through the phone by the user.
If programmed without a group number, pressing
HGDis disables all the
extension's group memberships.
If programmed with a group number, pressing
HGDis disables just the extension's
membership of that group.
[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Disable]
HGNS+ - Set Hunt Group Night Service (!)
Put a specific hunt group into night service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGNS+. This function can be programmed
through the phone by the user using an
Admin key.
Pressing HGNS+ puts the hunt group into night service. Group calls then go to its
night service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group In Service]
HGNS- - Clear Hunt Group Night Service
Returns a hunt group that has been manually put into night service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGNS-. Pressing
HGNS- puts the group
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Night Service]
HGOS+ - Set Hunt Group Out of Service
Put a specific hunt group out of service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGOS+. This function cannot be
programmed through the phone by the user.
Pressing
HGOS+ puts the hunt group out of service. Group calls then go to its out
of service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group Out Service]
HGOS- - Clear Hunt Group Out of Service
Returns a hunt group that has been manually put into out of service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGOS-. Pressing
HGOS- puts the group
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Out Of Service]