Avaya OFFICE 5410 - Manual (Page 35)

Function Key Programming Function Keys - Page 35
IP Office 5410 User’s Guide Function Keys - Page 35
40DHB0002UKEY – Issue 1 (7th February 2005) Function Key Programming
SAC - Send All Calls (!)on page 53.
DNDOf - Do Not Disturb Off
Takes the extension out of 'do not disturb' (no calls) mode.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
DNDOf switches the extension's do not disturb state off.
[User | Digital Telephony | Advanced | Do Not Disturb | Do Not Disturb Off]
DNDX+ - Do Not Disturb Exception Add
Adds the specified number to the extension's do not disturb exception list.
This function requires entry of the calling number when programmed. That number is
then shown next to DNDX+. This function cannot be programmed through the phone
by the user.
Pressing
DNDX+ adds the set number to the extension's do not disturb exception
list. That number can then call the extension and transfer calls to the extension even
when the extension is in do not disturb mode.
[User | Digital Telephony | Advanced | Do Not Disturb | Do Not Disturb
Exception Add]
DNDX- - Do Not Disturb Exception Delete
Removes the specified number from the extension's do not disturb exception list.
This function requires entry of the calling number when programmed. That number is
then shown next to DNDX-. This function cannot be programmed through the phone by
the user.
Pressing
DNDX- removes the set number from the extension's do not disturb
exception list. That number can then call the extension and transfer calls to the
extension even when the extension is in do not disturb mode.
[User | Digital Telephony | Advanced | Do Not Disturb | Do Not Disturb
Exception Del]
DPkUp - Directed Call Pickup (!)
Answer a call currently ringing at a specified user or group.
This function can be programmed with or without a a the target extension or group
number. This function can be programmed through the phone by the user using an
Admin key.
If programmed with a target number, the
DPkUp key displays that number. When a
call is ringing at that extension or group, press DPkUp to answer (pick up) that call.
If programmed without a target number, pressing DPkUp allows the user to enter
the target number for that pickup attempt.
[User | Digital Telephony | Emulation | Directed Call Pickup]
Drop - Drop (!)
Clears a current calls.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
For a call in progress, pressing Drop disconnects the caller.