Spectra Precision Survey Pro v4.6 GPS - Manual (Page 19)

Survey Pro GPS Quick Start Guide 17
Note: If you choose to do a timed session, you should not exit
from the Static Receiver Session screen until the timed
session is stopped.
ƒ Tap Start to mark the beginning of this site occupation in
the receiver’s raw data. If you are also storing the point
in the Survey Pro job file, it is written to the file and to
the RAW data now.
ƒ Tap Stop to end a session. You can also end a timed
session before the interval has elapsed.
Note: Most receivers do not support ‘canceling’ a point
occupation event after it is started. Therefore, even if you
cancel the occupation in Survey Pro, you will still likely see
the point occupation when the file is post processed.
End a Post Processing Session
When you want to stop recording post processing data and
close the file, go to Survey > End GPS Survey screen. Once
you tap End, recording session is stopped with the active
receiver and you will be given the opportunity to download
the post processing file to the data collector.
File Processing
ƒ Use the software supplied by the receiver manufacturer to
download the files to your PC.
ƒ Use your GPS baseline processing software to combine
the raw data from different receivers and generate GPS
base lines.
Note: See the documentation supplied with your PC software
for details on downloading and processing GPS raw data from
the receiver’s internal memory.