beautypg.com

Verifying connection to the router – Airlink101 300N User Manual

Page 6

background image

6

Blinking: Data transmission

Wireless
On:
Wireless is ready
Blinking:
Data transmission

LAN
On:
Link established
Blinking
: Data transmission

WPS (WiFi Protected Setup)
Blinking Green: WPS setting in progression
Static Green: WPS successfully set up
Blinking Red: Error found


3. Verifying Connection to the Router

Step 1

Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows

2000/XP) and click OK. You will see the command prompt as below.

Step 2

Type ping 192.168.1.1 and press Enter. You should get four reply responses

back.

Step 3

If you get Request timed out, or Destination host unreachable, double-check

the network cable connection between the computer and the router and try

Step 2

again.

If you still encounter problem, go to the next step; otherwise proceed to Section 3,
Configuring the Router
.