Airlink101 300N - Manual (Page 28)

28
6.2.4 Advanced Wireless Settings
You can configure various advanced wireless settings on this screen. These settings
are for advanced users ONLY. Most users will want to leave these settings alone.
Transmission Rate: Select from Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54
Mbps.
Transmission Power: Select from full, half, quarter, eighth, min.
CTS Protection Mode: Select from disable, enable, auto.
Beacon Interval: Enter a value from the valid range of 0 to 2346. The default value is
100 Milliseconds
DTIM Interval: Enter a value from the valid range of 0 to 255. The default value is 1.
Fragmentation Threshold: Enter an even number from 256 to 2346. The default value
is 2346.
RTS Threshold: Enter a value from the valid range of 0 to 2346. The default value is
2346.
Click Apply and OK to save the settings.