Airlink101 300N - Manual (Page 19)

19
Encryption: Choose 64 bits
Key Type: Choose HEX
WEP Key 1: Enter a 10 digit number. This will be your wireless password. An easy
one to remember is a phone number with area code (ex: 8887463238). You do not
need to enter anything in WEP Key 2, 3 and 4.
Default Key: Select key 1
Click Apply and OK to save the settings.
WPA
To enable WPA, select WPA-PSK or WPA2-PSK from the Security Mode.
Encryption Methods: Select either TKIP or AES as the encryption method. AES is
only supported by some newer cards, so make sure that your card supports AES before
selecting that option. TKIP will work with most cards. If you are unsure, choose TKIP.
Passphrase: Enter a passphrase between 8 to 63 characters long. For best security,
use a passphrase that is at least 30 characters long.