Connecting to the router wirelessly – Airlink101 300N User Manual

Page 12

Text mode
Original mode

5. Connecting to the Router Wirelessly

Below are the default wireless settings of the router. You must configure your wireless
network card to the same settings in order to establish a wireless connection to the
router. Please refer to your wireless network card’s manual on how to configure these
settings.

SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 6
WEP: disabled

If you want to change the router’s wireless settings, log in to the router and select the
Wireless tab. Make sure that you click Apply and OK to save the settings.

For more information about wireless settings, refer to section 6.2.