Airlink101 300N - Manual (Page 31)

31
Description: Enter a name for the policy.
Status: Choose to enable or disable the selected policy.
IP Addresses: Specify the range of IP addresses you wish to block from your router.
Protocol: Select protocol from All, TCP, UDP or ICMP
Port: Enter the range of ports you wish to block from the specified IP addresses
Schedule: Enter a schedule time
To view all of the policies, click the Summary button.
6.4.2 MAC Filters
Block or allow access to the network for devices with specific MAC addresses.
Enter Description Name: Enter a name for the policy.
MAC Address: Enter a MAC address
DHCP Client: Select DHCP client on your network.
To view all the policies, click the Summary button.