SHARKOON Bandit - Manual (Page 11)

bandit
2. Screw the fan to the attachment from the outside (fig. 28).
fig. 28
3. Connect the fan’s power plug to the PSU or the mainboard.
Note:
While installing fans make sure that (cool) air is taken in on the case’s front
side/bottom and blown out on its back side/top. The PC components with the
highest heat development should be placed directly within the airflow.
13. the docking station for Sata Hdds in the case’s top panel
1. Connect the docking station’s internal SATA plugs to the respective connectors
of the mainboard and the power supply (fig. 29).
A – SATA power connector (15-pin)
B – SATA data connector (7-pin)
fig. 29
2. Insert either a 2.5" or a 3.5" SATA HDD into the SATA docking station
(fig. 30 and fig. 31).
fig. 30 fig. 31
A
B