Seca 657 - Manual (Page 28)

28
Use the arrow keys to select the TIME
menu item and then press the FUNC
key to reach the settings menu. The
year appears in the display.
– Use the arrow keys to set the correct
year.
– Press the FUNC key to confirm the year
information entered. This simultaneous-
ly switches you to the next value you
can set. Change this value too using the
arrow keys and confirm the entry using
the
FUNC key.
Set all the values for the clock correctly
in the same way. The sequence of val-
ues is year, month, day, hour, minute.
On clocks with a 12-hour display,
A ap-
pears on the left of the display for morn-
ing times and
P for afternoon and
evening times.
– After you have confirmed the minutes
using the FUNC key, you exit the set-
tings menu automatically and the clock
continues to run at the time set.
If you also require seconds to be set accu-
rately, then proceed as follows:
– set a minute which is still to come, but
do not confirm it using the FUNC key.
As soon as the set minute starts, press
the
FUNC key. At that point, the clock
will start running at 00 seconds and the
set minute.
Correct weighing
– Press the Start key with no load on the
scale.
se(a , 8.8.8.8.8. and 0.0 appear consec-
utively in the display. The scale is then
automatically set to zero and ready to
use.
– Switch weighing range if necessary (see
page 29).
– Stand on the scale and keep still.
Note
The maximum load on each individual
corner of the weighing platform is
200 kg.
– Read the weighing result off the digital
display.