Seca 657 - Manual (Page 23)

Model 657 23 GB
3. Before you start…
Unpacking
Remove the packaging and place the scale on a firm, level surface.
The scope of supply includes:
• Weighing platform
• Display head plus connecting cable
• Wall bracket
• 1 angle adapter
• 2 Screws
• 2 Rawlplugs
• 1 seca mains unit
• Set of operating instructions plus decla-
ration of conformity
Fitting the display
– Carefully put down the scale.
– Connect the connecting cable to the
electronics box.
Desk-top stand
– Position the desk-top stand on the dis-
play casing from underneath.
The
broad side must be located at the
top of the display. The desk-top stand
locks in position.
– Place the display casing on a desk-top.