Pulse output kit drawing pulse output kits – SANDPIPER M15 Non-Metallic User Manual
Page 31
m15nmdl3sm-rev0713
Model M15 Non-Metallic Page 29
PULSE OUTPUT KIT OPTION
This pump can be fitted with a Pulse Output Kit. This converts the mechanical
strokes of the pump to an electrical signal which interfaces with the Stroke Counter/
Batch Controller or user control devices such as a PLC.
The Pulse Output Kits mount directly onto the Muffler Cap on the Air Distribution
Valve Assembly or onto the air valve and senses each stroke of the main spool.
Consult the factory for further information and availability.
Pulse Output Kit Drawing
Pulse Output Kits
475-244-001
10-30 VDC
475-244-002
110/220 VAC
475-244-003
10-30VDC, 110VAC and 220 VAC
See also other documents in the category SANDPIPER Pumps:
- SB1 (21 pages)
- HDB1 1/2 (19 pages)
- HDB2 (21 pages)
- HDB3 (21 pages)
- HDF1 (19 pages)
- HDF2 (20 pages)
- HDF3-A (19 pages)
- HDF3-M (20 pages)
- SA1 (19 pages)
- SA1 (18 pages)
- ST1 (20 pages)
- ST1 1/2 (21 pages)
- ET (14 pages)
- ET1 1/2 - SM (14 pages)
- ET1 1/2 - M (14 pages)
- ET2 - M (14 pages)
- ET3 - M (14 pages)
- E02 (11 pages)
- S05 Metallic (25 pages)
- S1F Metallic (25 pages)
- S15 Metallic (24 pages)
- S20 Metallic (24 pages)
- S30 Metallic (24 pages)
- PB 1/4 (16 pages)
- S05 (22 pages)
- S07 (35 pages)
- S10 (30 pages)
- S1F Non-Metallic (26 pages)
- S1F Non-Metallic (33 pages)
- S15 Non-Metallic (25 pages)
- S15 Non-Metallic (36 pages)
- S20 Non-Metallic (25 pages)
- S20 Non-Metallic (36 pages)
- S30 Non-Metallic (39 pages)
- S05 Non-Metallic (26 pages)
- S05 Non-Metallic (31 pages)
- SPA1 1/2-E (5 pages)
- SMA3-A (5 pages)
- EH2-M (11 pages)
- G05 (22 pages)
- G1F (21 pages)
- G15 (21 pages)
- G20 (21 pages)
- G30 (21 pages)
- GH2 (9 pages)