Model specific, Exp view – SANDPIPER S1F Non-Metallic User Manual
Page 11
s1fnmdl3sm-rev0614
3: EXP
VIEW
sandpiperpump
.
com
Model S1F Non-Metallic •
8
Troubleshooting Guide
Composite Repair Parts Drawing
Service & Repair Kits
476-217-000 Air End Kit (For Polypropylene Center Section)
Seals, O-Rings, Gaskets, Retaining Rings, Air Valve
Sleeve & Spool Set and Pilot Valve Assembly
476-218-000 Air End Kit
(Stroke Indicator Option, For
Polypropylene Center Section)
Seals, O-Rings, Gaskets, Retaining Rings, Air Valve,
Sleeve & Spool Set and Pilot Valve Assembly
476-197-354 Wetted End Kit
Santoprene Diaphragms, Santoprene Balls and
PTFE Seals
476-197-360 Wetted End Kit
Nitrile Diaphragms, Nitrile Balls and PTFE Seals
476-197-363 Wetted End Kit
FKM Diaphragms, FKM Balls and PTFE Seals
476-197-365 Wetted End Kit
Neoprene Diaphragms, Neoprene Balls and
PTFE Seals
476-197-635 Wetted End Kit
Neoprene Diaphragms, PTFE Overlay Diaphragms,
PTFE Balls and PTFE Seals
Electronic Leak Detector Kits
032-037-000
110 VAC / 220 VAC
032-045-000
12 - 32 VDC
Note:
Polypropylene pumps are shipped with the 1" NPT Pipe Plug (Item 64) installed in the end ports of both suction and discharge one-piece
manifolds. To convert to the Inline porting positions for pump installation and operation, first remove the pipe plugs and re-install in the center ports. Apply PTFE tape
or pipe sealant to threads of the plug before installation.
64
63
62
64
Torque:
140 in. lbs.
Torque:
160 in. lbs.
Torque:
140 in. lbs.
Torque:
200 in. lbs.
Torque:
200 in. lbs.
Torque:
180 in. lbs.
Torque:
320 in. lbs.
ONE-PIECE BONDED OPTION
OVERLAY OPTION
INLINE SUCTION
MANIFOLD OPTION
INLINE DISCHARGE
MANIFOLD OPTION
476-197-654 Wetted End Kit
Santoprene Diaphragms, PTFE Overlay
Diaphragms, TFE Balls and TFE Seals
476-197-659 Wetted End Kit
One-Piece Bonded Diaphragms,
PTFE Balls, PTFE Seals
476-198-655 Wetted End Kit
Santoprene Diaphragms, PTFE Overlay Diaphragms,
PTFE Pumping Diaphragms, PTFE Balls and
PTFE Seals
476-198-354 Wetted End Kit
Santoprene Diaphragms, Santoprene Pumping
Diaphragms, Santoprene Check Balls and PTFE Seals
476-198-659 Wetted End Kit
One-Piece Bonded Diaphragms, PTFE Pumping
Diaphragms, PTFE Balls, PTFE Seals
MODEL SPECIFIC