Dual port (aluminum model only), Atex compliant important, Optional – SANDPIPER S05 Metallic User Manual
Page 23
s05mdl1sm-rev0614
sandpiperpump
.
com
Model S05 Metallic •
20
Dual Port Suction and Discharge Repair Parts List
Item
Part Number
Description
Qty.
10*
170.045.115
Capscrew, Hex 5/16-18 X 1.25
24
170.045.330
Capscrew, Hex 5/16-18 X 1.25
24
17*
312.110.157E
Elbow, Suction BSP (tapered)
2
(replaces 312.110.157)
312.110.157N
Elbow, Suction 1/2" NPT
2
(replaces 312.110.157)
18*
312.111.157E
Elbow, Discharge BSP (tapered)
2
(replaces 312.111.157)
312.111.157N
Elbow, Discharge 1/2" NPT
2
(replaces 312.111.157)
23*
518.157.157
Manifold (not required)
0
27*
545.004.115
Nut, Hex 5/16.18
20
545.004.330
Nut, Hex 5/16.18
20
29*
560.083.360
O-Ring (Alum Manifold) (not required)
0
560.083.363
O-Ring (Alum Manifold) (not required)
0
560.083.364
O-Ring (Alum Manifold) (not required)
0
560.083.365
O-Ring (Alum Manifold) (not required)
0
720.064.600
Seal (Alum Manifold) (not required)
0
37*
900.004.115
Lock Washer
32
900.004.330
Lock Washer
32
Dual Port (Aluminum Model Only)
Illustration for Dual Port Suction and Single or Dual Port Discharge
(Not available for Stainless Steel or Alloy-C Equipped Models)
*Dual suction/dual discharge = no manifold.
ATEX Compliant
IMPORTANT
Read these instructions completely, before
installation and start-up. It is the responsibility
of the purchaser to retain this manual
for reference. Failure to comply with the
recommendations stated in this manual will
damage the pump, and void factory warranty.
1/2” NPT or 1/2” BSP Tapered
INTERNAL (DUAL PORT PARTS ONLY)
1” NPT or 1” BSP Tapered EXTERNAL
1/2” NPT or 1/2” BSP Tapered INTERNAL
(THIS PART REQUIRED FOR SINGLE
PORT SUCTION ONLY)
1” NPT or 1” BSP Tapered EXTERNAL
1/2” NPT or 1/2” BSP Tapered INTERNAL
(THIS PART REQUIRED FOR SINGLE
PORT SUCTION ONLY)
1/2” NPT or 1/2” BSP Tapered INTERNAL
(DUAL PORT PARTS ONLY)
6: OPTIONAL