RIKON Power Tools 10-201 - Manual (Page 14)

1. Place the switch cord (A) through hole (B) in front of
Cabinet.
2. Open motor cover, insert three prong switch cord (C)
into three hole outlet (D) of the motor cord.
SEE FIG. 29
SEE FIG,30
Fig.29
3. Pull slack in switch cord into the cabinet.
Make sure that the power cord inside of the cabinet
Is properly routed and clear of the saw blade and any
pinch points for all blade height and blade angle
Settings
Fig.30
CONNECTING SWITCH CORD TO
MOTOR CORD
14
A
B