Mediabridge MWN-WAPR150N User Guide - Manual (Page 75)

MWN-WAPR150N Wireless Router v11.8
75
 11b/g mode ：Allow the 11b/g-compliant client devices
to connect with the AP with auto-negotiation speed, and
11n wireless client to connect the device with 11g
speed.
 11b/g/n mode (default): Allow 11b/g/n-compliant
client device to connect with the AP with
auto-negotiation speed.
 SSID ：SSID (Service Set Identifier) is the unique name
of the wireless network.
 Broadcast (SSID): Select “Enable” to enable the
device's SSID to be visible by wireless clients. The
default is enabled.
 BSSID ：Basic Service Set Identifier of wireless network.
In IEEE802.11, BSSID is the MAC address of wireless
access point.
 Channel ： Specify the effective channel (from 1 to
11\Auto) of the wireless network.
 Extension Channel ：To increase data throughput of
wireless network, the extension channel range is used in
11n mode.
 Channel Bandwidth ：Select the channel bandwidth to
improve the wireless performance. When the network
has 11b/g and 11n clients, you can select the 40M;
when it is an 11n network, select 20/40M to improve its
throughput.