Mediabridge MWN-WAPR150N User Guide - Manual (Page 15)

MWN-WAPR150N Wireless Router v11.8
15
the other end into one of the YELLOW Ethernet
ports of the router). Once you have finished the
installation/configuration you may then unplug this
Ethernet cable from the computer and connect
wirelessly (if applicable).
1. Shut Down your computer.
2. If you have an existing Wireless Router, please
completely disconnect it from your computer and
modem.
3. Completely Power Down Your Cable Modem.
Unplug the modem’s power cord and remove the
battery (if applicable).
a. If you do not have access to the modem,
proceed to Step 4.
4. Connect your Network Cable(s)
a. Plug a network cable from your Cable
modem into your Medialink Router’s BLUE
WAN Port. (DO NOT connect the included
AC/DC Adapter to the router’s Power port at
this time.)
b. Using another network cable, plug one end