Mediabridge MWN-WAPR150N User Guide User Manual
Page 50
MWN-WAPR150N Wireless Router v11.8
50
http://192.168.0.1. Press “Enter”.
b. Input the “admin” in both User Name and Password.
c. Click “OK”.
d. *Note* Do not Click the “Next” button to run the
installation wizard once you have logged into the router.
5. Click on Advanced Settings and change the IP address to
be the same as the Default Gateway of the Original router
except the last number (ie: if the Default Gateway is
192.168.0.1, make the Medialink 192.168.0.XXX where XXX
can be any number between 2 - 254)
6. Click Apply, and then OK, and the Medialink router will
reboot.
a. If the browser does not refresh and allow into the
Medialink router’s web-based GUI through the new IP
address you will need to do an IPCONFIG /RELEASE and then
IPCONFIG /RENEW. See Section 5.1 for detailed instructions.
7. Once you are logged back into the Medialink router, name
your wireless network: Click Wireless Settings, then click
Basic Settings. Change the SSID name to a name that will
identify your wireless network (For example: Smith or
MyWireless.) Then, Click Apply. Click Ok.