LT Security LTAL5300PM - Manual (Page 23)

Baud rate
Default 9600, set up five options: 9600,19200,38400,57600,115200.
Ethernet network
Whether or not to open Ethernet communication, if choose "Yes", you should also set the following parameters:
IP address
Default IP is 192.168.1.201, adjust in accordance with demands
Subnet mask
Default subnet mask is 255.255.255.0, adjust in accordance with demands
Gateway address
Default gateway address is 192.168.1.1, adjust in accordance with demands
As the default communication mode: whether or not to use TCP / IP protocols for communications.
Connection password
The system default password is 0, that is no password, you can set, if set password, when connect you have to offer a
password. The number of connection password up to eight digits at most.
Dynamic IP allocation
Back-stage address
PC back-stage address is the address of upper computer, it can control the host computer of terminal unit, there is
need to enter the IP address of this host device
24