LT Security LTAL5300PM - Manual (Page 21)

The end of daylight saving time - the end time for implementing the daylight saving time
Correction time - different with the current time
Example: The current time is 16:07 , April 9
The beginning of daylight saving time: Set for April 1
The end of daylight saving time: Set for May 1
Correction time: set to 1 hour
Back to the checking work attendance interface, display the time :2009-4-8 16:07
4.2.2.7 Keypad tone settings
Function keys can be set as features include: overtime registration, off duty registration, work registration, view system
information, alarm, belling, query records, go-off, entering, return, out, overtime work leaving.
Default definition state transition of the system F1: work attendance, F2: check back from work, F3: overtime
attendance, F4: signed back to overtime work.
Here the function key is shortcut, you can switch directly to the needed state through these function keys without the need
to do those tedious operation.
4.2.3 Power supply management
Time starting up
The equipment automatically opens within specified time. (Run the function only in power off and time dormancy state)
Time power off
The equipment automatically closes within specified time. (All other modules are closed except the CPU core), press the
power button or to the boot time, it start up. (In sleep mode)
Time dormancy
The equipment automatically enters sleep mode within specified time. (All other modules are closed except the CPU core
and key board), press any key to wake-up equipment in working condition.
Belling settings
Belling Settings include beginning and ending time, duration, music.
Belling can be set 8 kinds of times, you can set up time of timing belling in accordance with the needs, when arrive at the
set time, the fingerprint machine will automatically ring, then to reach the length of ringing, it automatically cut-off. If
ringing time is 0, the ring is closed. Otherwise, ring according to setting time and length.
Two ringing ways:
22