LT Security LTAL5300PM - Manual (Page 22)

1) from the loudspeaker of machine itself.
2) Connect electric bell with a fingerprint machine, when arrive at the set time, the machine shall send out a relay signal to
trigger bells ring.
Free time settings
1. Free means that users do not use terminal equipment
2. Including transit state choice and free time settings, the two options are interrelated, when the free time to 0, the free
setting function is turned off; when the free time is non-0 value (in minutes ), such as 1, then if there is no any operation
within 1 minute, the system will enter free state of the specified settings
3. Free transition state include: sleep and shutdown
Locking off key
Failure to power button: “yes”- failure to shutdown button
“No”-effective to shutdown button
Time state transition
State transitions: when use roll machine, it require to keep a record of roll status in different time, after this setting,
when arrive time that user set, the machine will automatically convert to the status of rolling. Display the current rolling
state in the current rolling interface.
At least include: sign in, sign off, overtime sign in, overtime sign off etc four states and at least six time sects
4.2.4 Communication settings
Machine number
Number that the machine in the LAN, range from 1 to 255
RS232
Whether or not to use RS232 for communication
RS485
Whether or not to use RS485 for communication
23