LT Security LTAL5300PM - Manual (Page 11)

4.1 user management
4.1.1 User Registration
Explanation:
1、The intermediate user: Refer to the general user, namely person who needs to verify identity because of some purpose,
such as person who opens the door through the device, or only those who check on work attendance.
2、The administrator: Operates all other work in addition to carry out advanced settings, registration or delete operation of
administrators at the same level, can maintain their own data
3、Super-administrator: can carry out all other operations including the deletion of his own and all other administrators
except super-0 administrator. After leaving factory, Equipment default with a super administrator (code as "00000",
password is "888888") can enter the menu for all operations. Password can be modified, but not to be deleted.
4、The equipment only register the intermediate user, the general manager may exercise any authority of the super
administrator
5、The same ID number can register up to 10 different fingerprints, fingerprint ID from 0 to start, followed by increments,
it can also be entered manually
6、After entering the registration menu and the real pre-registration, indicating the default ID (the last No. automatically
add 1), at this point, can enter a custom ID. (1-65535 5-bit)
7、Register fingerprint three times is success. In accordance with the message (voice and text), press the same finger (enter
the password twice) three times continuously. If it fails, indicating a failure, and prompts re-registration.
8、Choose ID card or Mifare card in accordance with the device configuration,
9、When register fingerprint or RF card, as there have such fingerprint or card number in the system, the system will
refuse to register, suggesting that "repeat fingerprint" or "duplicate cards"
Basic Information dialog box:
Once choose the user registration, can enter the following dialog box
11