LT Security LTAL5300PM - Manual (Page 27)

personal authentication mode in accordance with needs of the user.
□ grouping：divide registered users into several parts (according to roles) in order to facilitate management,
□ time sect of the using group：whether or not to use default time sect of affiliated group by the user,
□ time sect of users：set time of unlocking, namely choose the set time number,
□ authentication mode of the using group：Whether or not to use validation mode of affiliated group by the user.
□ Personal authentication mode：Choose an authentication mode, no other than using group validation mode,
the personal validation mode shall effective.
Note ：1、the relationship between the time sect of using group and the user time sect
whether or not be effective only on the following user time sect in “ time sect of the using group” :
1) If the time sect of the using group is “yes”, the user time sect shall evaluate as the time sect number of affiliated group
automatically( the group time sect should be set firstly). ”
2)if modify the time sect of users, the time sect of using group is ‘No” automatically;
2、the relationship between using group validation mode and personal validation mode
1)If the group validation mode is “yes”, the group validation mode is effective, the personal validation mode is
invalid
2) If the group validation mode is “no”, the user use personal validation mode.
Example: set user 00001 into one group.
User 00001
Group 1
Time sect of using group yes
Time sect 1 1
Time sect 2 8
Time sect 3 40
Validation mode of using group yes
Validation mode FP
Use the time sect of group 1（here the time number of user shall change into group time number automatically）,
User uses group validation mode, in spite of personal authentication mode is which one, it depend on the group validation
mode
4.3.4 Unlocking combination settings
The following two are mutually exclusive, you can choose one only, none but the basic settings of unlocking combination
is “No”, the unlocking combination settings shall effective.
Basic settings of unlocking combination
Set the person number of unlocking the fingerprint machine, no matter in which group, the default setting is 1,
indicate that only one user pass the validation, it shall emit lock control signal, such as the setting is 3, it indicates three
users need to pass, then the fingerprint machine shall emit lock control signals, and intervals of each one is no more than
30 seconds. The maximum setting is no more than 5.
28