LT Security LTD2516HD-C - Manual (Page 49)

43
Digital Video Recorder User Manual
② Advance
Step 1: enter into system configuration P.T.Z configurationadvance; refer to Fig 4-38:
Step 2: in the Advance interface, click preset “Setting” button to see a dialog box as Fig 4-39:
Fig 4-38 P.T.Z configuration-advance Fig 4-39 advance-preset setting
a. in the preset set interface, while clicking Setting button, a dialog will pop-up as Fig 4-40:
Fig 4-40 preset set-setting
b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the
rotate speed and the value of zoom, focus and iris of the dome;
c. select the serial number of the preset point. Click
button to enable the PTZ wiper and click button to enable the
PTZ light.
Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two
buttons are just available when selecting PELCOP or PELCOD.