Lincoln Electric IM777 POWER FEED 10M Dual WIRE FEEDER - Manual (Page 46)

C-3 ACCESSORIES C-3
POWER FEED ® 10M DUAL WIRE FEEDER
K1504-1 - COIL ADAPTER
Permits 50 lb to 60 lb (22.7-27.2 Kg.) coils to be
mounted on 2” (51 mm) O.D. spindles.
NON-LINCOLN GUNS
Most competitive guns can be connected to the Power
Feed by using one of the K1500 series adapter kits.
GUN RECEIVER BUSHINGS AND
ADAPTERS
K489-7 (DUAL SCHEDULE FAST-MATE
ADAPTER)
This adapter installs directly into the wire drive feed-
plate, to provide for use of guns with Fast-Mate or
European style gun connections. This K489-7 will
handle both standard Fast-Mate and Dual Schedule
Fast-Mate guns.
K1500-1 (LINCOLN INNERSHIELD GUN
STANDARD CONNECTION)
Use this kit to connect the following guns: Guns hav-
ing a Lincoln standard innershield gun connector,
Magnum 200/300/400 with K466-1 connector kit, and
Magnum 550 guns with the K613-1 gun connection
kit.
K1500-2 (TWECO #2-#4 TYPE CONNEC-
TION)
The K1500-2 gun adapter comes factory installed on
the Power Feed 10 Dual wire feeder. Use this adapter
for guns that have a Tweco #2-#4 connector. Such
guns include Magnum 200/300/400 guns with K466-2
connector kit, and completely factory assembled
Magnum guns that are factory equipped with the
K466-2 connector (such as the K471-21, -22, and -23
dedicated Magnum 400 guns and the K497-20 and -
21 Magnum 200 guns).
K1500-3 (TWECO #5 CONNECTION)
For Magnum 550 gun with K613-2 Connection Kit,
and any other gun having a Tweco #5 connector .