Lincoln Electric IM777 POWER FEED 10M Dual WIRE FEEDER - Manual (Page 45)

• Coil Adapter
- Adapts 50-60 lb. Lincoln coils
to a 2" Spindle K1504-1
• Plastic Wire Cover for
30-44 lb. Wire Packages K1634-1
• Plastic Wire Cover for up
to 60 lb. Wire Packages K1634-2
• Water Connection Kit K590-6
• Water Connection Adapter KP1529-1
• Magnum Flow Sensor K1536-1
• Gas Guard Regulator K659-1
• Dual Procedure Switch (5 pin)
with Trigger Leads K683-3
• Large Panel Security Door K1574-1
• Swivel Platform K1557-1
• Light Duty Caster Kit K1556-1
• Insulated Lift Bail K1555-1
• Foot Amptrol K870-1
Includes: Foot Amptrol with 6 pin connector.
• Hand Amptrol K936-1
Includes: Hand Amptrol LA-9/-17/LW20 with 6 pin
connector.
• Hand Amptrol K932-2
Includes: Hand Amptrol LA-26/LW18 with 6 pin
connector.
• Foot / Hand Amptrol Kit K2320-1
Includes: Harness for connecting foot and hand
amptrols with 6 pin connector.
K162-1 - WIRE SPINDLE ADAPTER
Spindle for boom mounting 2” (51 mm) I.D. spools
with up to 60 lb. (27.2 kg) capacity. User mounted to
appropriately prepared boom framework. Includes an
easily adjustable friction brake for control of overrun (a
2” spindle is standard on Power Feed 10 Dual Bench
model).
When a 2” (51 mm) spindle is used with coils not on
12” (305 mm) or 8” (203 mm) O.D. spools, an adapter
is required:
C-2 ACCESSORIES C-2
FIELD INSTALLED
OPTIONS/ACCESSORIES
• OPTIONAL CONTROL PANEL KITS
• Arclink Cables
- Without Weld Cable
Cable Lengths: 8 ft K1543-8
16 ft K1543-16
25 ft K1543-25
50 ft K1543-50
100 ft K1543-100
• Co-Axial Power Cable
Cable Length: 25 ft. (350 amps) K1796-25
50 ft. (350 amps) K1796-50
75 ft. (325 amps) K1796-75
100 ft. (325 amps) K1796-100
• Weld Power Cables
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 10 ft
K1842-1
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 35 ft
K1842-35
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 60 ft
K1842-60
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 110 ft
K1842-110
• Feed Plate Gun Receiver Bushings. For use with:
- Lincoln Gun Connector (K466-1)
- Innershield/SubArc Guns K1500-1
- Tweco ® 4 Gun Connector (K466-2, K466-10)
- Magnum 200/300/400 Guns K1500-2
- Tweco ® 5 Gun Connector (K1637-7)
- Magnum 550 Guns K1500-3
- Miller ® Adapted Gun (K466-3) K1500-4
- OXO ® Gun K1500-5
- Fast Mate Guns K489-7
- Magnum 200/300/400 to K1500-2 Adapter K466-2
- K613-7 Magnum 550 to K1500-3 Adapter K613-7
• Incoming Bushings
- Lincoln Conduit .025-1/16" K1546-1
- Lincoln Conduit 1/16-1/8" K1546-2
• Wire Straightener
- For 10-Series Feed Heads
or Separate Mounting K1733-1
• Spindle Adapters
- For Mounting
2" I.D. Spools up to 60 lbs. K162-1
- For Mounting
2" I.D. Spools up to 60 lbs. K162-1H
- For 14 lb. Innershield Coils to be
mounted on 2" O.D. Spools K435
- For 8" O.D. Small spools (10-12.5 lbs.)
to be mounted on 2" O.D. spindles K468
POWER FEED ® 10M DUAL WIRE FEEDER