Lincoln Electric IM351 LN-7 GMA Wire Feeder - Manual (Page 45)

C-1 ACCESSORIES C-1
GENERAL
The following is a list of the accessories that can be
used with the LN-7 GMA wire feeder.
LN-7 & LN-7 GMA
Product Number Name
K162-1** Spindle Kit-Two inch Hub
K163** Undercarriage
K419** Burnback timer kit
K418** GMA Timer Kit
K417** Digital voltmeter kit
K320** Flux tank
K303** 50-60 lb Wire reel mounting stand
M-11514 Wire reel dust shield door for K303
Weld Power Cables:
K1840-10 Twist-Mate to Lug- 1/0, 350A, 60% Duty Cycle, 25 ft.
K1841-25 Twist-Mate toTwist Mate- 1/0, 350A, 60% Duty Cycle, 25 ft.
K1841-50 Twist-Mate toTwist Mate- 2/0, 350A, 60% Duty Cycle, 25 ft.
K1842-10 Lug to Lug-3/0, 600A, 60% Duty Cycle, 10 ft.
K1842-35 Lug to Lug-3/0, 600A, 60% Duty Cycle, 35 ft.
K1842-60 Lug to Lug-3/0, 600A, 60% Duty Cycle, 60 ft.
K1842-110 Lug to Lug-4/0, 600A, 60% Duty Cycle, 110 ft.
Welding Guns:
K126** Innershield gun - 350 Amps
K115** Innershield welding gun - 450 Amps
K112** Submerged arc welding gun - 500 Amps
K113** Submerged arc welding gun - 600 Amps
K497* Magnum GMA welding gun - 200 Amps
K470* Magnum GMA welding gun - 300 Amps
K471* Magnum GMA welding gun - 400 Amps
K527** Water solenoid kit
K494** Gas solenoid valve kit (Included on LN-7 GMA)
K1818-10 Wire Feeder Control Cable - 10 ft.
K1797-25 Wire Feeder Control Cable Extensions Requires K1818-10
K1797-50 Wire Feeder Control Cable Extensions Requires K1818-10
K1798 Adapter Cable for Control Cable to Terminal Strip Power Source
K1803-1 Work and Wire Feeder Power Cables Package
TABLE C.1 – LN-7 GMA ACCESSORIES.
*Magnum GMA welding guns require a K466-1 connector for use with the LN-7 GMA wire
feeder.
**A detailed description of each item is given later in this section.