beautypg.com

Troubleshooting, Caution errors on the display – Lincoln Electric IM823 LN-15 WIRE FEEDER User Manual

Page 31

background image

LN™-15 ACROSS THE ARC MODEL & (CE)

E-4

TROUBLESHOOTING

E-4

Observe all Safety Guidelines detailed throughout this manual

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

CAUTION

ERRORS ON THE DISPLAY

Fault Code

Description

Possible Adjustments

Err 81

Average motor over current shutdown

• The wire drive motor has overheated.

• Check to make sure the electrode

slides easily through the liner of the
gun.

• Verify that the spindle brake is not set

too tight.

• For best results, use only Lincoln elec-

trodes.

• Wait 10 minutes for the wire feeder to

cool.

Err 86

Trigger lockout.

• The ripple of the power source OCV is

too high, greater than 110V. (Across
the Arc Models only)

• Verify the power source is reconnect-

ed for the proper input voltage.

• Repair or replace the power source.

The power source does not conform to
NEMA