Otcfgmodemapplication – Apple Network Setup User Manual
Page 142
C H A P T E R 4
Network Setup Protocol Structures and Data Types
142
Protocol Structures
UInt8
pad;
FSSpec
modemScript;
Boolean
modemSpeakerOn;
Boolean
modemPulseDial;
OTCfgModemDialogToneMode
modemDialToneMode;
char
lowerLayerName[kMaxProviderNameSize];
};
Field descriptions
version
Depending how the preference was constructed,
version
may be
kOTCfgRemoteDefaultVersion
or
kOTCfgRemoteAcceptedVersion
. When reading the
version
field, accept either value. When writing the
version
field,
set it to
kOTCfgRemoteDefaultVersion
.
useModemScript
Set
useModemScript
to
TRUE
to indicate that a modem script
is to be used.
pad
A value that must be zero.
modemScript
The modem script that is to be used; this field is ignored if
a modem script is not to be used.
modemSpeakerOn
Set
modemSpeakerOn
to
TRUE
to indicate dialing with the
modem speaker on. Otherwise, set
modemSpeakerOn
to
FALSE
.
modemPulseDial
Set
modemPulseDial
to
TRUE
to indicate pulse dialing.
Otherwise, set
modemPulseDial
to
FALSE
for tone dialing.
modemDialToneMode
The dial tone mode that controls the way in which the
modem handles dial tone. For possible values, see the
lowerLayerName
The name of the underlying serial port in C string format.
The preference type for the
OTCfgModemGeneral
structure is
kOTCfgModemGeneralPrefs
, which is defined as
'ccl '
.
OTCfgModemApplication
4
The
OTCfgModemApplication
structure stores the current user mode setting and
the window position of the Modem control panel.