Apple Network Setup User Manual
Page 129
C H A P T E R 4
Network Setup Protocol Structures and Data Types
Protocol Structures
129
flashConnectedIcon
Set to zero if the menu bar flashes when a disconnection
occurs; set to 1 if the menu bar does not flash when a
disconnection occurs.
issueConnectedReminders
Set to 1 to flash an icon in the menu bar to remind the user
that the connection is active; set to zero to not flash an icon.
reminderMinutes
If Notification Manager reminders are enabled, the number
of minutes that are to elapse between reminders.
connectManually
Must be zero.
allowModemDataCompression
Set to zero if modem data compression is not allowed; set
to 1 if modem data compression is allowed.
chatMode
The chat mode. For possible values, see the
serialProtocolMode
The serial protocol mode (PPP, ARAP, or both). For
possible values, see the
enumeration.
passwordPtr
Run-time use only. Initialize
passwordPtr
to zero, ignore it
when you read it, and preserve its value when you write it.
userNamePtr
Run-time use only. Initialize
userNamePtr
to zero, ignore it
when you read it, and preserve its value when you write it.
addressLength
The length in bytes of the telephone number stored in the
kOTCfgRemoteAddressPref
.
addressPtr
Run-time use only. Initialize
addressPtr
to zero, ignore it’s
value when you read it, and preserve it’s value when you
write it.
chatScriptName
The user-visible name of the chat script for this
configuration.
chatScriptLength
The length in bytes of the chat script.
chatScriptPtr
Run-time use only. Initialize
chatScriptPtr
to zero, ignore
it’s value when you read it, and preserve it’s value when
you write it.
additionalPtr
Run-time use only. Initialize
additionalPtr
to zero, ignore
it’s value when you read it, and preserve it’s value when
you write it.
useSecurityModule
Must be zero.
securitySignature
Must be zero.