Apple Network Setup - Manual (Page 141)

C H A P T E R 4
Network Setup Protocol Structures and Data Types
Protocol Structures 141
field, accept either value. When writing the version field,
set it to kOTCfgRemoteDefaultVersion .
fType Must be zero for standard dial-up connections.
additionalPtr Must be zero for standard dial-up connections.
script Must be zero for standard dial-up connections.
address Must be zero for standard dial-up connections.
userName Must be zero for standard dial-up connections.
closedUserGroup Must be zero for standard dial-up connections.
reverseCharge Must be zero for standard dial-up connections.
The preference type for this preference is kOTCfgRemoteX25Pref , which is defined
as 'x25 ' .
IMPORTANT
Using Network Setup to configure X.25 connections is not
supported.
▲
Modem Structures 4
This section describes structures that store Modem control panel settings. The
structures are
■ OTCfgModemGeneral (page 141) stores per-connection modem preferences.
■ OTCfgModemApplication (page 142) stores the current user mode setting and
the window position of the Modem control panel.
■ OTCfgModemLocks (page 143) stores the lock settings for the Modem control
panel.
OTCfgModemGeneral 4
The OTCfgModemGeneral structure stores most of the per-connection modem
preferences.
struct OTCfgModemGeneral
{
UInt32 version;
Boolean useModemScript;