Johnson Level & Tool Mfg. 40-6580 User Manual

Page 21

Text mode
Original mode

9V Adapter

Unplug the charging port plug and insert the 9V adapter to supply
power to the instrument. If there are rechargeable batteries in the
battery compartment, they will be charged by the 9V adapter. In the
course of charging, the charging LED displays red, after charging for
about eight hours, the LED will turn green, this means the batteries
have been fully charged. If there are alkaline batteries in the battery
compartment the LED will display green and the batteries will not
charge.

Note: After the batteries have been fully charged, keep charging for

another two hours to ensure its capacity. Continuously charging
for 12 hours is advised for the first charge of new battery pack.
The instrument can operate while the batteries are recharging.

Charging Port Plug

2406H 5/28/09 9:04 AM Page 21