Johnson Level & Tool Mfg. 40-6580 User Manual

Page 10

Press the key once to make the first position in X-direction flash.

This position is the positive/negative slope position. Press the key

for positive slope indicated by a “O” sign. Press the key

for negative slope indicated by a “-” sign.

Press the key a second time to make the second position in X-

direction flash.

Press the key , the digit in this position increases to a maximum

of 7.

Press the key , the digit in this position decreases to a minimum

of 0.

Press the key a third time to make the third position in X-

direction flash.

Press the key , the digit in this position increases to a maximum

of 9.

Press the key , the digit in this position decreases to a minimum

of 0.

Press the key a fourth time to make the fourth position in X-

direction flash.

Press the key , the digit in this position increases to a maximum

of 9.

Press the key , the digit in this position decreases to a minimum of 0.

Press the key a fifth time to make the fifth position in X-direction

flash.

X-direction SLOPE setting

2406H 5/28/09 9:04 AM Page 10