Elitegroup CDC-I (V1.0) - Manual (Page 36)

32
Using BIOS
CPU Configuration
The item in the menu shows the CPU.
Genuine Intel(R) CPU (@2.13GHz)
This is display-only field and diaplays the information of the CPU installed in your
computer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Microcode Revision (262)
This item shows the Microcode version.
Processor Stepping (30661)
This item shows the processor stepping version.
Intel HT Technology (Supported)
This item shows that your computer supports Intel HT technology or not.
Hyper-threading (Enabled)
This item is only available when the chipset supports Hyper-threading and you
areusing a Hyper-threading CPU.
Processor Cores (Dual)
This item shows the core number of the processor.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Enabled for Windows XP and
Linux (OS optimized for
Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When Disabled
only one thread per
enabled core is enabled. CPU Configuration
Genuine Intel(R) CPU @2.13GHZ
EMT64 Supported
Processor Speed
2132 MHz
Processor Stepping 30661
Microcode Revision
262
Processor Cores Dual
Intel HT Technology Supported
Hyper-threading Enabled
Limit CPUID Maximum Disabled
Execute Disable Bit Enabled
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Processor Speed (2132 MHz)
This item shows the current processor speed.
Main Advanced Chipset Tweak Boot Security Exit