Elitegroup 600 - Manual (Page 80)

be depleted. Contact your dealer to change the battery.
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
You hear irregular beeps during operation of the
Notebook and the system halts.
The problem is beyond the scope of this manual.
Contact technical support.
An unidentified message is displayed.
Reboot the computer and run the BIOS system setup.
Confirm the Setup parameters. If the same message is displayed
after booting up again, contact technical support for assistance.
The system cannot access the DVD-ROM drive.
Check that a CD is properly inserted in the drive.
Make sure that you are using the correct program for that kind of
CD. For example, the system cannot read a data CD using an
audio program.
You cannot operate the printer.
Check the printer USB cable connection. Ensure that
the printer power switch is turned on. Confirm that the printer is
on-line.
You cannot use the mouse.
Check the cable connection.
Check the mouse with another application to see if there is a
software incompatibility problem.
If possible, check the mouse with another computer to see if it
works. If it doesn’t operate on a different system, the mouse might
be broken.
The fan does not stop operating when the system
enters the suspend mode.
Before entering the suspend mode, the fan still
operates in full speed to lower down the temperature of the system.
When the system temperature reduces into normal condition then
the fan will gradually slow down into its normal speed.
Contacting Your Dealer
If you still have a problem after reading the preceding sections, the next
step is to contact your dealer. Your dealer can determine if the problem is
something that requires the computer to be taken to the shop. Before you
call your dealer, however, prepare the following information:
•
How is your computer configured? Your dealer needs to know what
72