beautypg.com

2 brake and differential lock setting, Brake and differential lock setting -39, Operation – Alamo Axtreme 02983328C User Manual

Page 133: Opera t ion

background image

OPERATION

AXTREME 03/09

Operation Section 3-39

©2009 Alamo Group Inc.

OPERA

T

ION

9.2 Brake and Differential Lock Setting

Make sure the tractor brakes are in good

operating condition. Tractor brakes can be set to

operate independently allowing single rear wheel

braking action or locked together to provide

simultaneous rear wheel braking. FOR MOST

DRIVING AND OPERATING CONDITIONS, THE

BRAKE PEDALS SHOULD BE LOCKED

TOGETHER TO PROVIDE THE MOST

EFFECTIVE BRAKING ACTION.

Always disengage the tractor differential lock

when turning. When engaged the differential lock

will prevent or limit the tractor from turning. During

normal cutting conditions, locking the differential

provides no benefit and should not be used. OPS-U- 0013

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes.

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes.

When operating down a hill or on wet or rain slick roads, the braking distance increases;

use extreme care and reduce your speed in these conditions. When operating in traffic,

always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and

watch out for the other guy.

(Ops-0004-MISC)

BEFORE leaving the tractor seat, always engage the brake and/or set

the tractor transmission in parking gear, disengage the PTO, stop the

engine, remove the key, and wait for all moving parts to stop. Place the

tractor shift lever into a low range or parking gear to prevent the tractor

from rolling. Never dismount a Tractor that is moving or while the engine

is running. Operate the Tractor controls from the tractor seat only.

(SG-9)