Elitegroup VX900-I (V1.0A) - Manual (Page 37)

Chapter 3
VX900-I USER MANUAL
33
EUP Function (Enabled)
This item allows user to enable or disable EUP support.
Press to return to the main menu setting page.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the wake-
up alarm. You must use an ATX power supply in order to use this feature.
PCI
Onboard
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Help Item
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default Settings F1: General Help
Init Display First PCI
Options
PCI / Plug and Play Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Init Display First (PCI)
This item allows you to choose the primary display card.
Press to return to the main menu setting page.