Atlantis Land DISKMASTER NASF101 - Manual (Page 33)

33
custom configurations and restore all of the factory defaults
including the password.
2 Before you configure this device you need to know the following
default settings:
• Username: admin
• Password: atlantis
• IP address: by DHCP, (If a DHCP server isn’t available in
the network, the Disk Master will use 169.254.0.1).
• Server name: DISKMASTER
3 It is highly recommended to change the default username and
password. Make sure you store the username and password in a
save place.
A.3 WEB Interface
I cannot access the web configurator.
Steps Corrective Action
1 Make sure you are using Internet Explorer 7.0 and later versions.
2 Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the
Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the version of
your Internet browser.)
E.G. Internet Explorer 7 (Tools->Internet Options->Advanced-
>Reset).
I cannot access the web configurator.
Steps Corrective Action
1 Check Link LED (green).
2 Make sure you are using the correct IP address of the Disk Master.
3 Found the new IP address of the Disk Master with Utility.
4 Reset the device.