Atlantis Land DISKMASTER NASF101 - Manual (Page 17)

17
4.3 Data/Time Setting
You can change time setting form this page. Clicks “Apply” to save the setting. By
default SNTP is in network time service, your can also select “Synchronize to PC”. If
internet access is available we recommended setting SNTP to Network time service
instead.
4.4 IP Config
By default, the “IP config” is set to “Automatic IP”. This is the recommended setting
and will allow NAS Dongle to obtain its IP address automatically. If you prefer setting
it manually, select the static IP option, enter your own value and click apply to confirm
the new setting.
Setting it manually is useful when it often obtain a different IP address but you have a
static IP address in order to mount the network drive or setup port forwarding as an
example.