Atlantis Land DISKMASTER NASF101 - Manual (Page 11)

11
2.5 Factory Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
• Username: admin
• Password: atlantis
• IP Address: Obtained by DHCP Server (if a DHCP isn’t available, the
device will be reacheable with the following IP address: 1 92.168.1.1).
• Server name: DISKMASTER
2.6 Searching Disk Master NASF101
To run SearchUtility:
1. Insert the Cd-Rom provided and wait for autorun.
2. Select the product Disk Master NASF101 and after click on SearchUtility
icon.
3. Now, the utility will discovery the NAS dongle and it show it. Press
Connect to access to the web management.
If SearchUtility will not show any device, please check
cabling.
4. Log on the web interface using default credential (username=”admin”,
password=”atlantis”) and press OK to confirm.