Physicalswitch, Response parameters, Get uris path parameters – Brocade Network Advisor REST API Guide (Supporting Network Advisor 12.3.0) User Manual
Page 70
56
Brocade Network Advisor REST API Guide
53-1003160-01
Topology
5
PhysicalSwitch
Retrieves information about physical switches. This includes properties such as IP address, switch
serial number, model, and so on.
GET URIs
Path parameters
Response parameters
URI
Description
hysicalswitches
Retrieves the PhysicalSwitch for a given FC switch.
witches/fcskey/physicalswitches
Retrieves the physical switch of the given FC switch.
Name
Description
rgkey
Resource group identifier.
fcfkey
FC fabric identifier.
fcskey
FC switch identifier.
Property
Description
key
The unique identifier for the switch, which is the WWN.
wwn
The WWN of the switch.
ipAddress
The IP address of the switch. Could be either IPv4 or IPv6 address.
userId
The Telnet user name used to log in to switch.
firmwareVersion
The firmware version of the switch.
vendor
The vendor information of the switch
supplierSerialNumber
The supplier serial number of the switch.
partNumber
The part number of the switch.
modelNumber
The model of the switch, such as Brocade 6505 and Brocade 6520.
manufacturer
The manufacturer for the switch.
switchSerialNumber
The factory serial number of the switch.
vendorVersion
The vendor version of the switch.
vendorPartNumber
The vendor part number of the switch.
snmpInformsEnabled
Indicates if the SNMP informs is enabled.
contact
The contact details of the switch. Syscontact from the RFC 1213 MIB.
location
The location details for the switch. Syslocation from RFC 1213 MIB.
description
The description of the switch. Sysdescr from RFC 1213 MIB.