Initiator target zoning – Brocade Network Advisor REST API Guide (Supporting Network Advisor 12.3.0) User Manual
Page 146
132
Brocade Network Advisor REST API Guide
53-1003160-01
Zoning
5
Initiator target zoning
Carries out initiator-to-target attach and detach operations.
POST URIs
Path parameters
Request parameters
Notes
•
The InitiatorTargetsRequest instance must be formed and sent through the POST request.
•
This URI supports single initiator to single target and single initiator to multiple target zoning.
•
The initiator and targets must be WWNs.
•
The active zone set name will be “NARestZoneSet.”
•
In the case of single initiator – single target zoning, the zone name is
.
•
In the case of single initiator – multiple target zoning, the zone name will be
.
•
At least one initiator and one target in the input are mandatory.
•
In the event that initiator or targets contain white spaces, they will be removed and the
operation will proceed as usual.
URI
Description
ach
Carries out initiator-to-target attach operations.
ach
Carries out initiator-to-target detach operations.
Name
Description
rgkey
Resource group identifier.
fcfkey
FC fabric identifier.
Name
Description
lsanZoning
Whether this is an LSAN operation (case-sensitive, use either true or false).
zoneNamePrefix
This parameter is by default NARestZone unless specified. For LSAN zoning, the prefix is
fixed as LSAN. All LSAN zone names start with LSAN_.
initiator
The WWN of the initiator.
targets
The WWN of the targets.
activate
Whether to activate the zoneset (case-sensitive, use either true or false).
edgeFabricWwns
The principal WWNs of the edge fabrics to which the LSAN zones must be propagated. This
parameter is applicable for LSAN zoning only.