Brocade 300 Hardware Reference Manual - Manual (Page 33)

Brocade 300 Specifications
● Switch components......................................................................................................... 33
● Weight and physical dimensions.....................................................................................33
● Facility requirements....................................................................................................... 34
● Power supply specifications............................................................................................ 34
● Environmental requirements........................................................................................... 35
● General specifications.....................................................................................................36
● Data transmission ranges............................................................................................... 37
● Memory specifications.....................................................................................................37
● Fibre Channel port specifications....................................................................................38
● Serial port specifications................................................................................................. 38
● Supported SFPs and HBAs.............................................................................................38
Switch components
The Brocade 300 switch includes the following components:
• Rack-mountable 1U chassis, designed for a 19-inch rack space, with forced-air cooling that flows
from the non-port side of the switch to the port side.
• 24 Fibre Channel ports, compatible with short wavelength (SWL), long wavelength (LWL), and
extended long wavelength (ELWL) SFP transceivers
• One RJ-45 serial port on the port side of the switch
• One IEEE-compliant RJ-45 connector on the port side of the switch for use with 10/100 Mbps
Ethernet
• 24 port LEDs, 1 switch power LED, 1 switch status LED, and 2 Ethernet LEDs
• One USB port for system log file downloads or firmware upgrades
• One universal AC input and three integrated fans
Weight and physical dimensions
The following table lists the weight and physical dimensions of the Brocade 300 switch.
Switch Specifications TABLE 3
Brocade 300
Height 42.9 mm (1.69 inches)
Depth 306.6 mm (12.07 inches)
Width 428.75 mm (16.88 inches)
Brocade 300 Hardware Reference Manual 33
53-1000862-06