beautypg.com

Axis media control (amc), Other methods of accessing the video stream – Axis Communications Video Server 243Q Blade User Manual

Page 14

background image

14

AXIS 243Q Blade - Video streams

Unicasting should be used for video-on-demand broadcasting, so that there is no video

traffic on the network until a client connects and requests the stream. However, as more

and more unicast clients connect, the traffic on the network will increase and may cause

congestion. Although there is a maximum of 20 unicast viewers, note that all multicast

users combined count as 1 unicast viewer.

RTP/RTSP
This unicast method is RTP tunneled over RTSP. This can be used to exploit the fact that it

is relatively simple to configure firewalls to allow RTSP traffic.

RTP/RTSP/HTTP or RTP/RTSP/HTTPS
These two methods can also be used to traverse firewalls. Firewalls are commonly

configured to allow the HTTP protocol, thus allowing RTP to be tunneled.

AXIS Media Control (AMC)

The recommended method of accessing live video from the AXIS 243Q Blade is to use the

AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows. This ActiveX

component is automatically installed on first use, after which it can be configured by

opening the AMC Control Panel applet from the Windows Control Panel. Alternatively,

right-click the video image in Internet Explorer.

Other methods of accessing the video stream

Video/images from the AXIS 243Q Blade can also be accessed in the following ways:

• If supported by the client, the AXIS 243Q Blade can use Motion JPEG server push

to display video. This option maintains an open HTTP connection to the browser

and sends data as and when required, for as long as required.

• As single JPEG images in a browser. Enter the path:

http:///axis-cgi/jpg/image.cgi

Note:

To specify other parameters refer to the VAPIX® API in the Developer pages at the Axis web site
www.axis.com/developer.

• Windows Media Player. This requires AMC and the MPEG-4 decoder to be

installed. The paths that can be used are listed below in the order of preference.

• Unicast via RTP: axrtpu:///mpeg4/media.amp
• Unicast via RTSP: axrtsp:///mpeg4/media.amp
• Unicast via RTSP, tunneled via HTTP: axrtsphttp:///mpeg4/media.amp
• Unicast via RTSP, tunneled via HTTPS: axrtsphttps:///mpeg4/media.amp
• Multicast: axrtpm:///mpeg4/media.amp

Note:

= IP address.