Brocade Multi-Service IronWare YANG Configuration Guide (Supporting R05.6.00) - Manual (Page 27)

Multi-Service IronWare YANG Configuration Guide 19
53-1003038-02
Chapter
3
Interface Configuration
In this chapter
• Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Interface configuration elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Interface state elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Full examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Overview
This chapter describes the interface components that provide support for configuring the network
interfaces, both link-level (including VLAN-tagged interfaces) and IP addresses (IPv4 and IPv6).
NOTE
For the most recent YANG models, visit http://my.brocade.com .
Interface configuration elements
Each element of the interface corresponds to the following:
• A YANG model description
• An XML description
• A CLI description
The following subsections compare a specific example for each interface configuration element.
Interface identifier
The interface identifier is a restricted integer type that behaves as a unique identifier for single or a
group of interfaces. This element is an edit request for an Ethernet interface and a VE interface and
disables each port.
TABLE 1 Interface identifier
YANG model XML CLI
leaf interface-id
{
type interface-all-types;
description "Single or group of
interfaces";
}
<brcd:interface-id>ethernet 1/1</brcd:interface-id>
<brcd:interface-id>ve 2brcd:interface-id> interface ethernet
<slot-number>/<port-number>